Dakota 4WD V8-4.7L Flex Fuel (2008)
Blower Motor Relay: Service and Repair
Installation
INSTALLATION
NOTE: Refer to the fuse and relay layout map on the integrated power module (IPM) cover for blower motor relay identification and location.
1. Position the blower motor relay (2) into the proper receptacle of the IPM (1).
2. Align the blower motor relay terminals with the terminal cavities in the IPM receptacle and push down firmly on the relay until the terminals are
fully seated.
3. Close the cover of the IPM.
4. Reconnect the negative battery cable.
