Dakota 4WD V8-4.7L Flex Fuel (2008)
Wheel Speed Sensor: Service and Repair
Front Wheel Speed Sensor - Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the front rotor and caliper adapter.See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal
and Replacement/Brake Rotor - Removal.
3. Remove the wheel speed sensor mounting bolt (1) from the hub (3).
4. Remove the wheel speed sensor (2) from the hub (3).
5. Remove the wiring from the clips and disconnect the electrical connector (1).