Dakota 4WD V8-4.7L Flex Fuel (2008)
6. Lower the vehicle.
7. Connect the battery negative cable terminal clamp (4). Tighten the battery terminal clamp pinch-bolt hex nut to 5 NmM (45 in. Lbs.).
8. Check the vehicle for normal operation.
POSITIVE
1. Position the battery positive cable (4 and 8) in the vehicle.
2. Install the nut (5) securing the cable to the Integrated Power Module (IPM) (7) stud (6). Tighten the nut to 11.5 Nm (105 in. lbs.).
3. Install the nut (3) securing the cable (4) to the alternator. Tighten the nut to 14 Nm (125 in. lbs.).
4. Install the cable pushpin (5) into the left frame rail (4).
5. Connect the starter solenoid wire harness connector (1).
