Dakota 4WD V8-4.7L Flex Fuel (2008)
1. Remove the outer tie rod end (2) with special tool C-3894-A or equivalentCount the number of turns when removing, this will aid in setting
the toe after installation. See: Tie Rod End - Removal.
2. Remove the jam nut.
3. Remove the clamps (1) for the inner tie rod boot (2).
4. Remove the boot (2).
5. Install the special tool # 10087-3 socket (1) and # 10087-2 Tube (2) and remove the inner tie rod end.
Outer Tie Rod End
OUTER TIE ROD END
