Dakota 4WD V8-4.7L Flex Fuel (2008)
Control Arm Bushing: Service and Repair
Installation
Lower Control Arm Bushing
LOWER CONTROL ARM BUSHING
1. Install the new bushing (4) into the lower control arm (3) using tools C-4212-F (Press) (1), 9603-2 (Depth Gauge) (2), 9603-1 (Driver) (5).
2. Remove the control arm from the vise.
3. Install the lower control arm (6) See: Service and Repair/Front Lower Control Arm - Installation.
4. Reset the vehicle ride height See: Alignment/Service and Repair.
5. Perform a wheel alignment See: Alignment/Service and Repair.
Upper Control Arm Bushing
UPPER CONTROL ARM BUSHING
