Dakota 4WD V8-4.7L Flex Fuel (2008)
1. Install the new bushing (2) into the lower control (3) arm using tools C-4212-F (Press) (5), 9601-3 (Depth Gauge) (4), 9601-4 (Driver) (1).
2. Remove the control arm from the vise (6).
3. Install the upper control arm (4) See: Service and Repair/Front Upper Control Arm - Installation.
4. Reset the vehicle ride height See: Alignment/Service and Repair.
5. Perform a wheel alignment See: Alignment/Service and Repair.
Lower Control Arm Shock Bushing
LOWER CONTROL ARM SHOCK BUSHING
NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure
proper operation during the removal and installation process.