Dakota 4WD V8-4.7L Flex Fuel (2008)
Torque Converter: Service and Repair
Removal
REMOVAL
1. Remove transmission and torque converter from vehicle.See: Service and Repair/Removal and Replacement/Removal
2. Place a suitable drain pan under the converter housing end of the transmission.
CAUTION: Verify that transmission is secure on the lifting device or work surface, the center of gravity of the transmission will shift
when the torque converter is removed creating an unstable condition. The torque converter is a heavy unit. Use caution when separating
the torque converter from the transmission.
3. Pull the torque converter forward until the center hub clears the oil pump seal.
4. Separate the torque converter from the transmission.
