Dakota 4WD V8-4.7L Flex Fuel (2008)
CAUTION: Failure to follow these instructions may result in a driveline vibration.
Installation
INSTALLATION
NOTE: Clean bolts and apply Mopar(R) Lock & Seal Adhesive or equivalent to the threads before installation.
1. Slide slip yoke (1) onto automatic transmission/transfer case output shaft (2) with reference marks aligned.
2. If equipped with manual transmission, align transmission flange (1) and propeller shaft reference marks. Install new flange bolts (2) and tighten to
115 Nm (85 ft. lbs.).