Dakota 4WD V8-4.7L Flex Fuel (2008)
5. Tighten nut (1) to pull bearing (2) into the receiver (3).
Installation
INSTALLATION
1. Remove any old sealer/burrs from axle tube.
2. Install axle shaft bearing with Installer C-4198 (1) and Handle C-4171 (2). Drive bearing with the bearing part number against the installer until
tool contacts the axle tube.
3. Coat new axle seal lip with axle lubricant and install with Installer C-4198 (1) and Handle C-4171 (2).
4. Install axle shaft.
