Dakota 4WD V8-4.7L Flex Fuel (2008)
6. Rotate cage 90° into the housing (1).
7. Apply lubricant included with replacement boot/joint to the ball races. Spread lubricant equally between all the races.
8. Tilt inner race/hub (2) and cage (3) and install the balls (4).
9. Place new clamps onto new boot and slide boot onto the shaft to its original position.
10. Apply the rest of lubricant to the C/V joint and boot.
11. Push the joint onto the shaft until the snap ring (1) seats in the groove (3). Pull on the joint to verify the span ring has engaged.
