Dakota 4WD V8-4.7L Flex Fuel (2008)
Overdrive Switch: Service and Repair
Installation
INSTALLATION
NOTE: There is enough slack in the wire to pull out the connector from the lever.
1. Pull the connector (2) out of the lever (1) just enough to grasp it.
CAUTION: Be careful not to bend the pins on the tow/haul overdrive off switch. Use care when installing the switch, as it is not indexed,
and can be accidentally installed incorrectly.
2. Install the tow/haul overdrive off switch (3) into the connector (2).
3. Push the tow/haul overdrive off switch (3) and wiring into the shift lever (1).
4. Install the tow/haul overdrive off switch retainer onto the shift lever.
