dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Backlite|Page 9540 > < Backlite|Page 9538
Page 4
background image

9. Set glass (1) on lower fence and move glass forward into opening using the alignment pins to guide the backlite into position.

10. Firmly push glass (1) against rear window glass opening fence.
11. Bend tabs (2) around edges of backlite opening fence to retain glass.
12. Clean excess urethane from exterior with MOPAR(R), Super Clean or equivalent.
13. Allow urethane to cure at least 24 hours (full cure is 72 hours).
14. Water test to verify repair before returning vehicle to service.

15. Connect the rear window defogger electrical connector, if equipped.

16. On club cab models, install the upper c-pillar trim (2) See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar

Trim/C-Pillar Trim Panel-Installation

Backlite|Page 9540 > < Backlite|Page 9538