Dakota 4WD V8-4.7L Flex Fuel (2008)
3. Loosen the glass clamp screws (2).
4. Raise the glass into the full up position and secure into place with tape or equivalent.
5. Disconnect the electrical connector (6).
6. Remove the two lower regulator bolts (5).
7. Remove the one bolt at the motor.
8. Loosen the remaining three regulator bolts (3 and 4) located at the keyhole slots.
9. Lift regulator up and out of the keyhole slots and remove from door.
Manual
REMOVAL
1. Remove the watershield. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door
Watershield/Removal
