Dakota 4WD V8-4.7L Flex Fuel (2008)
2. Temporarily install the window switch and position the glass (1) to gain access to the glass clamp screws (2).
3. Loosen the glass clamp screws (2).
4. Raise the glass (1) into the full up position and secure into place with tape or equivalent.
5. Disconnect the electrical connector (3).
6. Remove the two lower regulator bolts and the one bolt at the motor (4).
7. Loosen the remaining three regulator bolts (2) located at the keyhole slots.
8. Lift regulator (1) up and out of the keyhole slots and remove from door.
