Dakota 4WD V8-4.7L VIN J (2007)
CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector could damage the cable
or radio.
6. Disconnect the antenna cable by pulling the locking antenna connector (2) away from the radio.
7. Pull the antenna cable out through the radio opening in the instrument panel.
Installation
INSTALLATION
1. Insert cable through radio opening. Route behind glove box and attach to retainers.
2. Connect antenna cable (2) to radio (1).
3. Install the radio.
4. Reach under the instrument panel outboard of the glove box to access and connect the antenna coaxial cable connector.
