Dakota 4WD V8-4.7L VIN J (2007)
**2008**
DIAGNOSIS:
Inspect the vehicle horizontal panels for the appearance of an etched surface (picture available in "PAINT CONDITION DECK" - publication number
81-316-0507 - see "INSECT ETCH" graphic).
Two procedures are available depending on the severity of the condition. Repair Procedure "A" is for conditions that do not show through to primer and
Repair Procedure "B" is for conditions that show primer within the etch area.
PARTS REQUIRED:
SPECIAL TOOLS/EQUIPMENT REQUIRED:
REPAIR PROCEDURE "A" FINESSE:
1.
Clean with Mopar Car Wash Concentrate, and water.
2.
Wipe with an alcohol based cleaner
3.
Evaluate the paint condition.
4.
Measure and record paint film thickness in areas to be sanded using an electronic mil gauge (PSE).
5.
Use 2000 grit sand paper mounted to a ridged backer to remove all etching.
6.
If you remove more than 0.5 mil of clear coat you will need to refinish using repair procedure "B" refinish.
7.
If refinishing is not required polish sanded areas using Mopar Compound Power Cleaner # BSMM8432.
8.
Remove swirl marks using Mopar Swirl Free polish # BSMM8232.
9.
Detail vehicle as required.
REPAIR PROCEDURE "B" REFINISH:
1.
Clean with Mopar Car Wash Concentrate, and water.
2.
Wipe with an alcohol based cleaner
3.
Evaluate the paint condition.
4.
DA surface with 600 grit sand paper.
