Dakota 4WD V8-4.7L VIN J (2007)
7. Route the cable (5) through the underbody bracket and seat the cable end fitting in the bracket.
8. Connect the cable (1) to the cable adjuster (4).
9. Perform the park brake adjustment procedure.
10. Lower the vehicle.
Rear Park Brake Cable
REAR PARK BRAKE CABLE
1. Push each cable end through the brake cable support plate hole (2) until the cable end fitting tabs lock into place.
NOTE: Pull on the cable to ensure it is locked into place.
2. Install the rear cables (1) into the park brake lever behind the rear of the brake assembly (3).
3. Install the hold down brackets for the park brake cable (2 & 3).
