Dakota 4WD V8-4.7L VIN J (2007)
Drive Belt Tensioner: Service and Repair
Installation
3.7L/4.7L ENGINE
1. Install pulley and pulley bolt to tensioner. Tighten bolt to 61 Nm (45 ft. lbs.) torque.
2. An indexing slot is located on back of tensioner. Align this slot to the head of the bolt on the front cover. Install the mounting bolt. Tighten bolt to
41 Nm (30 ft. lbs.).
3. Install accessory drive belt.
4. Check belt indexing marks.
