Dakota 4WD V8-4.7L VIN J (2007)
21. If required, remove the rubber flange (3) from around the heater core tubes (4).
22. Carefully lift the A/C evaporator (1) out of the lower half of the HVAC housing (2).
NOTE: If the rubber flange around the evaporator tubes is deformed or damaged, the flange must be replaced.
23. If required, remove the rubber flange (3) from around the evaporator tubes (4).
24. To remove the blend-air door (1) from the inside of the HVAC housing (2), first carefully release the retaining tab of the blend door pivot lever (3)
from the pivot shaft of the blend door, using a small pick-type tool.
25. Pull the blend door pivot lever out of the pivot shaft of the blend-air door.
