dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Keyless Entry Module|Removal|Page 39 > < Keyless Entry Module|Removal
Page 2
background image

8. Disconnect the wire harness connector (2) from the Sentry Key REmote Entry Module (SKREEM) (1).

9. On vehicles equipped with the optional remote start system, disconnect the coaxial cable from the coaxial connector receptacle on the SKREEM.

10. Remove the screw (2) that secures the SKREEM (1) to the steering column housing.

11. Disengage the antenna ring (3) from around the ignition lock cylinder housing (4) and remove the SKREEM.

Keyless Entry Module|Removal|Page 39 > < Keyless Entry Module|Removal