Dakota 4WD V8-4.7L VIN J (2007)
1. Position the child tether anchor (1) through the access hole in the cab back trim panel (2) onto the upper cab back panel reinforcement (3).
2. Install and tighten the screw (5) that secures the child tether anchor to the cab back. Tighten the screw to 14 Nm (10 ft. lbs.).
3. Fold the access door (4) back against the cab back trim panel to conceal the tether anchor.
Tether Strap - Club Cab
TETHER STRAP - CLUB CAB
WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts,
buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt that is cut,
frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or ineffective buckle or
retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child restraint anchor or the unit to which the
anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or child restraint component. Always replace damaged or
ineffective seat belt and child restraint components with the correct, new and unused replacement parts listed in the DaimlerChrysler
Mopar(R) Parts Catalog.
NOTE: The following procedure applies only to the right outboard rear seat upper child tether strap used on club cab vehicles equipped with optional
rear seats.
1. Position the child tether strap (1) through the access hole in the cab back trim panel (2) onto the upper cab back panel reinforcement (3).
2. Install and tighten the screw (5) that secures the child tether strap to the cab back. Tighten the screw to 14 Nm (10 ft. lbs.).
3. Fold the right outboard rear seat upper back pad (4) back against the cab back trim panel to conceal the tether strap.
Tether Strap - Quad Cab
TETHER STRAP - QUAD CAB
WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts,
