Dakota 4WD V8-4.7L VIN J (2007)
Seat Belt Buckle Switch: Description and Operation
Description
DESCRIPTION
The seat belt switch is a small, normally open, single pole, single throw, leaf contact, momentary switch. Only one seat belt switch is installed in the
vehicle, and it is integral to the buckle of the driver side front seat belt buckle-half (3), located on the inboard side of the driver side front seat cushion
frame. The seat belt switch is connected to the vehicle electrical system through a two-wire pigtail wire (2) and connector on the seat belt buckle-half,
which is connected to a wire harness connector and take out of the seat wire harness routed beneath the driver side front seat cushion in the passenger
compartment.
The seat belt switch cannot be adjusted or repaired and, if ineffective or damaged, the entire driver side front seat belt buckle-half unit must be replaced.
