Dakota 4WD V8-4.7L VIN J (2007)
7. Remove the steering coupling shaft (3) from the vehicle.
Installation
INSTALLATION
1. Install the upper steering coupling shaft (3) to the vehicle.
NOTE: A new steering coupling shaft pinch bolt for the upper and lower shafts must be used.
2. Install the upper coupling (7) to the column (1).
3. Install the upper pinch bolt (2) use a new bolt and tighten to 57 N.m (42 ft.lbs).
4. Install the toe plate (5) nuts (6) and tighten to 12 N.m (105 in.lbs).
