Dakota 4WD V8-4.7L VIN J (2007)
Steering Wheel: Service and Repair
Installation
INSTALLATION
NOTE: Do not reuse the old steering wheel bolt (4) (a new bolt must be used)
NOTE: Make sure to align the spline on the steering wheel hub to the column shaft.
1. Install steering wheel (3) to the column (6).
NOTE: Be certain that the steering wheel mounting bolt is tightened to the proper torque specification to ensure proper clockspring
operation.
2. Install the new steering wheel bolt (4). Tighten the bolt to 61 Nm (45 ft. lbs.).
3. Install the driver's side air bag (3) to the steering wheel.