Dakota 4WD V8-4.7L VIN J (2007)
Stabilizer Link: Service and Repair
Rear
Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the rear tire.
3. Support the rear axle with a jack.
4. Remove the lower link nut (4) at the stabilizer bar (6).
5. Remove the upper link nut (1) and bolt (2) at the frame. On the left side stabilizer link (7), upper bolt pull the bolt (2) back after the nut (1) is
removed and then pull the link (7) downward with the bolt (2) still in the link (7) to allow clearance from the fuel tank (3).
6. Remove stabilizer link (7).
Installation
INSTALLATION