Dakota 4WD V8-4.7L VIN J (2007)
6. Apply light coating of grease to the inner diameter of the clutch cylinder push rod (1) and outer diameter of the clutch pedal pin (2).
7. Install clutch cylinder push rod (1) on clutch pedal pin (2) and install retaining clip.
8. Install slave cylinder (2) in transmission and ensure rod is securely engaged in release lever.
NOTE: If new clutch linkage is being installed, do not remove plastic shipping strap from the slave cylinder push rod. The strap will
break on its own upon first clutch application.
9. Install slave cylinder nuts (1) and tighten to 23 Nm (17 ft. lbs.).
10. Verify that fluid line from master cylinder to slave cylinder is properly routed.
