Dakota 4WD V8-4.7L VIN J (2007)
9. Slide propeller shaft off the transfer case and remove shaft.
CAUTION: Failure to follow these instructions may result in a driveline vibration.
Installation
INSTALLATION
1. If equipped with transfer case flange, align propeller shaft joint and transfer case flange reference marks.
2. Install propeller shaft joint (2) bolts (1) and tighten to 41 Nm (30 ft. lbs.).
3. If equipped with transfer case boot, slide propeller shaft (1) onto transfer case (4).
4. Install CV boot clamp (3).