Dakota 4WD V8-4.7L VIN J (2007)
Axle Bearing: Service and Repair
Front Axle - C205F
Removal
REMOVAL
1. Remove half shaft, axle shaft and seal.
2. Install axle shaft bearing Remover C-4660-A (3) in the bearing (1). Then tighten the nut (2) to spread the remover in the bearing.
3. Install bearing remove cup (1) bearing (2) and nut (3). Tighten nut to draw bearing out.
4. Inspect axle shaft tube bore for roughness and burrs.
Installation
INSTALLATION
1. Wipe the axle shaft tube bore clean.
2. Install axle shaft bearing with Installer 5063 (1) and Handle C-4171 (2).
