Dakota 4WD V8-4.7L VIN N (2000)
Garage Door Opener Transmitter: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the overhead console from the headliner. Refer to Overhead Console in the Removal and Installation for the procedures.
Garage Door Opener Storage Bin Door Remove/Install
3. Remove the two screws that secure the garage door opener storage bin door pivot and bumper block to the overhead console housing.
4. Remove the garage door opener storage bin door pivot and bumper block from the overhead console housing.
5. Unlatch and remove the garage door opener storage bin door from the overhead console housing.
INSTALLATION
1. Position the garage door opener storage bin door into the overhead console housing.
2. Engage the latch of the garage door opener storage bin door with the latch striker on the rear of the storage bin opening in the overhead console
housing.
3. Be certain that both garage door opener storage bin door pivot pins are located in the two pivot receptacles in the overhead console housing just
behind the sunglasses storage bin.
4. Position the garage door opener storage bin door pivot and bumper block onto the overhead console housing.
5. Install and tighten the two screws that secure the garage door opener storage bin door pivot and bumper block to the overhead console housing.
Tighten the screws to 2.2 Nm (20 in. lbs.).
6. Install the overhead console onto the headliner. Refer to Overhead Console in the Removal and Installation procedures.
7. Reconnect the battery negative cable.