dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Seat Cushion Cover - Loose|Page 7340 > < Power Seat Switch|Specifications|Page 7331
Page 1
background image

Seat Cover: Customer Interest
Front Seat Cushion Cover - Loose

NUMBER: 
23-13-00

GROUP: 
Body

DATE: 
April 7, 2000

SUBJECT:
Front Seat Cushion/Cover Loose

MODELS:
2000 (AN) Dakota

OVERVIEW:
This bulletin involves securing the cushion/cover by re-attaching the hook and arrow and securing the hook and arrow with a hog ring.

NOTE: 

THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH 40-20-40 FRONT SEATS (SALES CODE CBE) AND BUCKET SEATS (SALES
CODE CAD).

SYMPTOM/CONDITION:
The front seat cushion/cover is loose.

DIAGNOSIS:
Inspect the front seat cushion/cover to verify if the cover is loose. If the cover is loose, verify that the hook and arrow attached to the rear of the cover is
not damaged. If the front seat cushion/cover is loose and the hook and arrow is not damaged, perform the Repair Procedure. If the hook and arrow is
damaged, the cover must be replaced.

PARTS REQUIRED:
AR (2) 05019385AA Hog Ring

EQUIPMENT REQUIRED:
Hog Ring Pliers

REPAIR PROCEDURE:
1.

If the cushion/cover has been removed, reinstall it. Make sure that the hook and arrow is reattached.

Figure 1

2.

Secure the ends of the hook and arrow together by installing a hog ring p/n 05019385AA through both ends of the Hook and arrow (Figure 1).

Front Seat Cushion Cover - Loose|Page 7340 > < Power Seat Switch|Specifications|Page 7331