Dakota 4WD V8-4.7L VIN N (2000)
Parking Brake Cable: Service and Repair
Front Parking Brake Cable
REMOVAL
1. Raise and support the vehicle.
2. Loosen cable adjusting nut.
3. Disengage front cable from cable tensioner.
4. Remove support cable from the front cable.
5. Remove support and lower vehicle.
6. Remove left kick panel.
7. Fold left front edge of floor covering rearward and remove cable grommet from floor pan.
8. Remove cable from park brake pedal assembly.
9. Work cable and housing assembly up through floor pan.
10. Remove front cable from vehicle.
INSTALLATION
1. Insert front cable through floor grommet.
2. Insert cable retainer into hole at bottom of pedal assembly bracket and connect cable end.
3. Fold floor covering down and install kick panel.
4. Raise and support vehicle.
5. Install support cable to the front cable.
6. Attach front cable to tensioner.
7. Adjust parking brakes.
8. Remove support and lower vehicle.
