Dakota 4WD V8-4.7L VIN N (2000)
Cruise Control Servo Cable: Service and Repair
REMOVAL
1. Disconnect negative battery cable at battery.
2. Remove air box housing from throttle body. The accelerator cable must be partially removed to gain access to speed control cable.
Cable Connectors at Bell Crank
3. Using finger pressure only, disconnect accelerator cable connector at throttle body bellcrank pin by pushing connector off bellcrank pin towards
front of vehicle. DO NOT try to pull connector off perpendicular to the bellcrank pin. Connector will be broken.
4. Lift accelerator cable from top of cable cam.
