Dakota 4WD V8-47L VIN N (2000) Water Pump Replacement - Page 1796
11. Remove water pump and gasket. Discard gasket.
INSTALLATION
1. Clean gasket mating surfaces.
2. Using a new gasket, position water pump and install mounting bolts as shown. Tighten water pump mounting bolts to 54 Nm (40 ft. lbs.) torque.
3. Spin water pump to be sure that pump impeller does not rub against timing chain case/cover.
4. Connect radiator lower hose to water pump.
5. Relax tension from belt tensioner. Install drive belt.
