Dakota 4WD V8-4.7L VIN N (2000)
Recirculation Air Door Actuator Remove/Install
4. Unplug the two vacuum harness connectors from the recirculation air door actuator.
5. Remove the two stamped nuts that secure the recirculation air door actuator to the blower motor housing cover.
6. Unhook the actuator link from the recirculation air door lever.
7. Remove the actuator from the blower motor housing cover.
8. Reverse the removal procedures to install. Tighten the mounting nuts until the recirculation air door actuator is seated to the blower motor
housing cover.
