Dakota 4WD V8-4.7L VIN N (2000)
Fuel Gauge Sending Unit Lock Tab/Tracks - 2 Door Models
5. The sending unit is retained to pump module with a small lock tab and notch. Carefully push lock tab to the side and away from notch while
sliding sending unit downward on tracks for removal. Note wire routing while removing unit from module.
INSTALLATION
1. Position sending unit into tracks. Note wire routing.
2. Push unit on tracks until lock tab snaps into notch.
3. Connect 2 sending unit wires into 4-way connector and install locking collar.
4. Connect 4-way electrical connector to module.
