dodge Workshop Repair Guides

Dodge Dakota 4WD V8 Auto Repair Manuals - Workshop Service

Central Timer Module - Lock Up|Page 201 > < Central Timer Module - Lock Up|Page 199
Page 2
background image

The Highline CTM provides the following features:
-

Remote Keyless Entry (RKE)

-

Central Locking Feature

-

Chime

-

Courtesy Lamp controls/Illuminated Entry

-

Power Door Locks

-

Speed Sensitive Intermittent Wipers

-

Enhanced Accident Response

-

Remote Radio Switches

-

Vehicle Theft Security System (VTSS)

The module is located on the right side of the glove box behind a metal bracket. It contains a white 18-way and a green 14-way connector.

Chime System

The chime system is built into the CTM. The system also supports an external chime request from the instrument cluster. This feature allows the
instrument cluster to request a chime from the CTM for gauge problems and tell-tale warnings. There are two chime rates, Low; 50 chimes per
minute
 for reminders and High: 180 chimes per minute for serious conditions that require immediate attention. The high rate chime sounds when
the key is left in the ignition and the doors are open or the headlights are left ON. The low rate chime sounds for any of the other conditions. There
is a variable rate feature that allows the chime to sound continuously for key-in and headlamp warning as long as the door is open. The seat belt
warning chime is activated for six seconds, and all other chime conditions will activate the chime once at the same time the warning light on the
cluster is illuminated.

The Chime will sound for the following conditions:
-

Ignition OFF, key in ignition, driver's door open

-

Ignition OFF, headlamps on, driver's door open

-

Seat belt warning (after prove-out)

-

Malfunction Indicator lamp (MIL) illuminated (after prove-out)

-

Airbag lamp illuminated (after prove-out)

-

Anti-lock lamp illuminated (after prove-out if equipped)

-

Check gauges lamp illuminated

-

Low fuel

-

Low washer fluid

Compass Mini-Trip Computer (CMTC)

This system, located in the overhead console, displays information on outside temperature, compass direction and trip information.

Compass and Temperature Display
This display provides the outside temperature and one of eight compass readings to indicate the direction the vehicle is facing.

Trip Odometer (ODO)
Shows the distance traveled since the last reset.

Average Fuel Economy (AVE ECO)
Shows the average fuel economy in MPG (miles per gallon) or L/100Km since the last reset.

Instantaneous Fuel Economy
Shows the fuel economy for the last few seconds in MPG or L/100Km.

Distance to Empty (DTE)
Shows the estimated distance that can be traveled with the fuel remaining in the tank. This is calibrated using the MPG for the last few minutes.

Elapsed Time (ET)
Shows the accumulated ignition on time since the last reset.

Step Button
Press this button to cycle through all the mini-trip computer displays.

US/M Button
Press this button to convert all vehicle displays from US to Metric to US.

To Reset the Display
Press the Step and US/M buttons simultaneously for at least two seconds and all resettable conditions will be reset. This will occur only if a
resettable function (AVG ECO, ECO, ET) is currently being displayed.

Automatic Compass Calibration

Central Timer Module - Lock Up|Page 201 > < Central Timer Module - Lock Up|Page 199