Dakota 4WD V8-4.7L VIN N (2000)
All involved vehicles have been entered to DIAL System Functions 53 and VIP for dealer inquiry as needed.
Function 53 provides involved dealers with an updated VIN list of their,incomplete vehicles. The customer name, address and phone number are listed if
known. Completed vehicles are removed from Function 53 within several days of repair claim submission. To use this system, type "53" at the "ENTER
FUNCTION" prompt, then type "0RD890".
All involved vehicle owners known to DaimlerChrysler are being notified of the service requirement by first class mail. They are requested to schedule
appointments for this service with their dealers. A copy of the owner letter is shown.
Enclosed with each owner letter is an Owner Notification Form. The involved vehicle and recall are identified on the form for owner or dealer reference
as needed.
Vehicles Not Available
If a vehicle is not available for service, let us know by filling out the pre-addressed Owner Notification Form or describe the reason on a postcard and
mail to:
DaimerChrysler Corporation
CIMS 482-00-85
800 Chrysler Drive East
Auburn Hills, Michigan 48326-2757
Additional Information
If you have any questions or need assistance in completing this action, please contact your Zone Service Office.
Service Procedure
1.
Raise the vehicle on an appropriate hoist.
2.
Position two (2) tall jack stands under the left (driver) side of the cab (Figure 1).
3.
Remove the two (2) left side cab mounting bolts (Figure 1).
4.
Loosen, but do not remove, the two (2) right passenger) side cab mounting bolts.
5.
Carefully lower the vehicle on the hoist until the left side of the cab is supported by the jack stands and the cab has been raised 2-3 inches above
the frame.
CAUTION:
Do NOT raise the cab of the vehicle more than 3 inches or damage to the cab may result.
