Dakota 4WD V8-4.7L VIN N (2000)
8. Install the large ladder clamp on the boot and secure as done with the small ladder clamps (Fig. 8).
9. Slide the outer C/V joint boot small clamp onto shaft.
10. Slide outer C/V joint boot onto shaft and into position on shaft.
11. Install small clamp to boot as done above.
12. Install large boot clamp over outer C/V joint.
13. Install outer C/V joint to shaft.
14. Install large boot clamp to boot and C/V joint.
15. Install the C/V driveshaft.
