Dakota 4WD V8 Windshield Replacement - Service and Repair - 2000 Model - Page 8137
5. Cut urethane bonding from around windshield using a suitable sharp cold knife.
6. Using a long knife, cut urethane bonding from inside the cab at the base of the windshield.
INSTALLATION
WARNING: Allow the urethane at least 24 hours to cure before returning the vehicle to use.
CAUTION: Roll down the left and right front door glass and open the rear glass slider (if available) before installing windshield to avoid pressurizing
the passenger compartment if a door is slammed before urethane is cured. Water leaks can result.
