Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
Hood Latch: Service and Repair
Release-Hood Latch
Removal
REMOVAL
1. Remove hood latch (3).
2. Detach the release cable (1) and the retainer clips (2) in the engine compartment.
3. Separate the release cable grommet (3) from the dash panel hole.
4. From the inside of the vehicle, remove the screws (4) attaching the hood release handle to the bottom of the instrument panel (1).
5. Pull/route the hood release cable (2) through the dash panel hole and remove it from the inside of the vehicle.
Installation
INSTALLATION