Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
7. Install the rear door sill scuff plate.
Removal
REMOVAL
Club Cab, Without Rear Jumper Seats
1. Adjust the front seat to its most forward position.
2.
CAUTION: Keep the inner bottom end of the upper C-pillar trim panel away from the cab back trim panel when removing the upper C-pillar
trim panel to prevent scratching the back trim panel.
Using a trim stick C-4755 or equivalent, disengage the retaining tabs (3) that secure the upper C-pillar trim panel (2) to the C-pillar. Pull the outer
bottom end of the trim panel outward toward the door opening so that the inner bottom end of the trim panel doesn't touch the cab back trim panel. While
maintaining the outward pressure, pull the trim panel away from the C-pillar and remove the trim panel.
Club Cab, With Rear Jumper Seats
1. Adjust the front seat to its most forward position.
