Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
10. Using Special Tool 6958 spanner wrench (4)with adapter pins 8346, torque the camshaft sprocket retaining bolt (2) to 122 Nm (90 ft. lbs.).
11. Install the cylinder head cover (1).
Camshaft - Right
INSTALLATION
1. Lubricate camshaft journals with clean engine oil.
NOTE: Position the right side camshaft so that the camshaft sprocket dowel is near the 10 o'clock position, This will place the camshaft at
the neutral position easing the installation of the camshaft bearing caps.
2. Position the camshaft into the cylinder head.
