Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
Ignition Shut Down Relay (For Antitheft): Service and Repair
Removal
REMOVAL
The ASD relay is located in the engine compartment within the Power Distribution Center (PDC). Refer to label on PDC cover for relay location.
1. Remove PDC cover.
2. Remove relay from PDC.
3. Check condition of relay terminals and PDC connector terminals for damage or corrosion. Repair if necessary before installing relay.
4. Check for pin height (pin height should be the same for all terminals within the PDC connector). Repair if necessary before installing relay.
