Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
Alternator: Service and Repair
Installation
INSTALLATION
3.7L / 4.7L
1. Position generator (3) to engine and install 2 horizontal bolts (1) and 1 vertical bolt (2).
2. Tighten all 3 bolts.
3. Snap field wire connector (4) into rear of generator.
4. Install B+ terminal eyelet to generator output stud. Tighten mounting nut (2).
CAUTION: Never force a belt over a pulley rim using a screwdriver. The synthetic fiber of the belt can be damaged.
CAUTION: When installing a serpentine accessory drive belt, the belt MUST be routed correctly. The water pump may be rotating in
the wrong direction if the belt is installed incorrectly, causing the engine to overheat.
5. Install generator drive belt.
