Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
Stabilizer Link: Service and Repair
Front
Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the lower nut (5).
3. Remove the upper nut, retainers and grommets from the stabilizer bar (3).
4. Remove the stabilizer link (1) from the vehicle.
Installation
INSTALLATION
1. Install the stabilizer link (1) to the vehicle.
2. Install the retainers, grommets and upper nut to the stabilizer bar (3) and Tighten to 23 Nm (17 ft. lbs.).
3. Install the lower nut (5) and Tighten to 102 Nm (75 ft. lbs.).
4. Remove the support and lower the vehicle.