Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
1. Disconnect the transmission range sensor (5) and solenoid/pressure switch assembly wiring connectors.
2. Disconnect the variable line pressure connector (4), if equipped.
3. Disconnect the shift cable from the shift lever (at the transmission).
4. Move the manual shift lever clockwise as far as it will go. This should be one position past the L position. Then remove the manual shift lever.
NOTE: One of the oil pan bolts has a sealing patch applied from the factory. Separate this bolts for reuse.
5. Remove transmission pan bolts (2).
6. Remove transmission oil pan (1).
