Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
Clutch Pedal Assembly: Service and Repair
Installation
INSTALLATION
1. Lubricate pedal bushings and shaft (1) with a silicone grease or with Mopar(R) multi-mileage grease.
2. Install bushings in pedal bore and on pin.
3. Install pedal (6) on pivot shaft (1).
4. Secure pedal on shaft with washer and snap ring.
5. Apply light coating of grease to the inner diameter of the master cylinder push-rod (5) and the outer diameter of the clutch pedal pin.
6. Connect push rod to pedal and secure rod with retaining clip.
