Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
Wiper Arm: Service and Repair
Removal
REMOVAL
1. Lift the wiper arm (4) to its over-center position to hold the wiper blade (1) off of the glass and relieve the spring tension on the wiper arm to
wiper pivot shaft (6) connection.
2. Carefully pry the plastic nut cap (3) off of the pivot end of the wiper arm.
3. Remove the nut (5) that secures the wiper arm to the pivot shaft.
4. If necessary, use a suitable battery terminal puller (3) to disengage the wiper arm (1) from the pivot shaft (2).
5. Remove the wiper arm pivot end from the pivot shaft.
