Dakota 4WD V8-5.2L VIN Y (1998)
7. Remove the four screws that secure the door trim panel to the inner door panel.
8. Lift the door trim panel upwards far enough to disengage the stepped retainers that secure the door trim panel to the inner door, then gently pull the
lower edge of the trim panel away from the door while still lifting the panel upwards.
9. Pull the door trim panel away from the inner door panel far enough to access the power mirror switch wire harness connector.
Door Trim Panel Wire Harness Connectors
10. Unplug the power mirror switch wire harness connector.
11. Remove the power mirror switch from the back of the door trim panel.
12. When installing the power window and lock switch and bezel unit to the door trim panel opening, insert the rear of the bezel into the opening, then
push down on the front of the bezel until the retaining tab snaps into place.
13. Reverse the remaining removal procedures to complete the installation. Tighten the trim panel mounting screws to 2.2 N.m (20 in. lbs.).
