Dakota 4WD V8-5.2L VIN Y (1998)
12. Remove bracket-to-intake manifold bolts (number 1 and 2).
13. Remove six bracket bolts (number 3).
14. Lift and position generator and A/C compressor (along with their common mounting bracket) to gain access to bypass hose. A block of wood may
be used to hold assembly in position.
15. Loosen and position both hose clamps to center of bypass hose. Remove hose from vehicle.
INSTALLATION
1. Position bypass hose clamps to center of hose.
2. Install bypass hose to engine.
3. Secure both hose clamps.
